 |
 |
|
New Products Developed by KEP |
| |
| |
1) Extra Strong Polyacetal
Resin |
| |
|
Improved the strength of POM thereby improved the physical
properties such as heat-resistance, long-term dimensional
stability, fatigue- resistance and creep-resistance.
Used for speedometer frames, valve housing, gears and rollers
as substitute material for metal.
Major products
: KEPITAL FG2025, MF3020, FB2025, FT2020
|
| |
2) Impact-Resistant
Polyacetal Resin |
| |
|
Because POM is a high crystalline resin, it is very strong
and hard, but at the same time, brittle and inflexible. By
adding various elastomers to the standard grade a new alloy
product was obtained which is softer and impact-resistant.
Main areas of utilization include clips, switch components.The
softer property also makes it optimal for making gears that
generateless noise.
Major products
: KEPITAL FU1020, FU2020, TE-24 and others.
|
| |
3) Wear-Resistant Polyacetal
Resin |
| |
|
Traditionally POM has been used to make moving parts because
of its self-lubricative property. the same time, brittle and
inflexible. By adding various elastomers to the standard grade
a new alloy product was obtained which is softer and impact-resistant.
Main areas of utilization include clips, switch components.
The softer property also makes it optimal for making gears
that generateless noise.
Major products
: KEPITAL FU1020, FU2020, TE-24 and others.
|
| |
4) Weather-Resistant
Polyacetal Resin |
| |
|
By adding UV stabillizer and UV spectrophotometer, a high
degree of stability againstUV degradation aging is attained
and prevents properties from altering over time.
Used for automobile interior and exterior parts and building
materials
Major products
: F20-52, F20-52U, F20-51, GD-52 and others
|
| |
5) Anti-Static and Conductive
Resin |
| |
|
By adding conductive carbonblack or anti-static agent to
the resin, the surface electrical resistance of molded goods
are reduced and static electricity is controlled.
Used to make electrical parts that could become contaminated
by collecting dust on the surface or for purposes of reducing
electro-static noise.
Major products
: FV-30, FV-40, F30-63, ET-20S and others.
|
| Developing
New Usages |
| |
1) Developed
usage for automobile speaker grilles
2) Developed usage for automobile fuel pumps
3) Developed
usage for making pulsators in washing machines
Research of
Processing Technologies
1) Research of flow and contraction properties of POM
2) Research of properties in injection and extrusion processing
3) Research of applying new molding techniques
Research of
Processing Technologies
1) Molecular weight analysis
2) Terminal device analysis
3) Structural analysis
4) Development of new analysis techniques
5) Customer support
Research of
Processing Technologies
1) Material analysis support
2) Processing analysis support
3) Substitute material support
4) Flow analysis and structural analysis
5) Molding design support and Gate Balance adjustment
6) Warping analysis
|
